D-Link DI-304M manual ISP Access Setup, PPP/MP Setup

DI-304/DI-304M ISDN Remote Router

ISP Access Setup

♦ISP Name – Enter your ISP name.

♦Dial Number – Enter the ISDN access number provided by your ISP.

♦Username – Enter the username provided by your ISP.

♦Password – Enter the password provided by your ISP.

♦Require ISP Callback (CBCP) – If your ISP supports the callback function, check "Require ISP Callback (CBCP)" to enable the Callback Control Protocol during PPP negotiations.

♦Scheduler (1-15) – Enter up to 4 index numbers for calls that have been previously configured on the Call Schedule Setup windows (under Advanced Setup).

PPP/MP Setup

♦Link Type – There are four link types:

◊Link Disable - Disable the ISDN dial-out function.

◊Dialup 64Kbps - Use one ISDN B channel for Internet access.

◊Dialup 128Kbps - Use both ISDN B channels for Internet access.

◊Dialup BOD -BOD stands for bandwidth-on-demand. The router will use only one B channel under low traffic situations. Once the single B channel bandwidth is filled, the other B channel will be dialed automatically. For more detailed BOD parameter settings, refer to the Advanced Setup group→ Call Control and PPP/MP Setup.

◊None not included.

♦PPP Authentication – There are two types of authentication:

◊PAP Only - Set the PPP session to use the PAP protocol to negotiate the username and password with the ISP.

30