DI-304/DI-304M ISDN Remote Router
Click Call Control and PPP/MP Setup and specify a phone number in the Remote Activation field.
Call Control Setup
Dial Retry and Dial Delay Interval
These two parameters set global settings for ISDN dialup access.
♦Dial Retry – Specify the dial retry counts per triggered packet. A triggered packet is any packet whose destination is outside the local network. The default setting is no dial retry. If set to 5, for each triggered packet, the router will dial 5 times until it is connected to the ISP or remote access router.
♦Dial Delay Interval – Specify the interval between dialup retries. By default, the interval is 0 seconds.
Remote Activation
If the router accepts a call from the number 12345678, it will disconnect immediately and dial to the ISP. Note that Internet Access Setup → Dialing to a Single ISP should be preset properly.
PPP/MP Dial-Out Setup
Basic Setup
Select according to the ISP service type subscribed to and enter parameters according to the setup you entered for Remote Access Setup in Chapter 4.
51
