D-Link manual DI-304 DI-304M

DI-304/DI-304M ISDN Remote Router

DI-304

DI-304M

♦POWER— Comes on as soon as you connect the router to the power adapter and plug the power adapter into a suitable AC outlet.

♦STATUS— Should be blinking if the router is functioning properly.

♦ISDN – LINK— Indicates that the router has an ISDN line connected to the ISDN interface and it has been successfully initialized.

Note: On some NT1 boxes, the LINK indicator will go off when the ISDN line has been idle for a while. When the router is dialing or answering a call, it should be on again.

♦ISDN – B1 and B2— On if there is an active ISDN session on that channel or if that channel is making or receiving a call.

♦LINK/ACT— 1 through 4 These indicators light up when a port is connected to a powered-on Ethernet/Fast Ethernet station. The LEDs blink when information is transmitted or received on a port.

♦100/10M – 1 through 4 These indicators light up when a port is operating at 100Mbps. Otherwise, if this indicator is dark and the corresponding LINK indicator is lit, then the port is operating at 10Mbps.

♦PHONE – 1 (DI-304M only) — Lights up when standard phone port 1 is in use.

♦PHONE – 2 (DI-304M only) — Lights up when standard phone port 2 is in use.

10