D-Link manual DI-304/DI-304M Front Panel, Factory Default Settings Default IP Network Settings

DI-304/DI-304M ISDN Remote Router

Before you set up the router, you need to know the default settings of the

DI-304/DI-304M as shown below:

Factory Default Settings:

Default IP Network Settings:

IP Address: 192.168.0.1

Subnet Mask: 255.255.255.0

DHCP Server: Enabled

Start IP Address: 192.168.0.100

IP Pool Counts: 100

DNS Server IP Address

-Primary IP Address: empty

-Secondary IP Address: empty

Web Configurator:

Username: admin

- Password: <blank>

Note: Blank means no password required.

Telnet Console:

Password: <blank>

Note: Blank means no password required.

Management from the Internet: Not allowed

Virtual TA Server: Enabled

Remote Dial-In Server: Disable

IP: 192.168.0.200.

The following section outlines how to connect your DI-304/DI-304M to your LAN and ISDN line. Refer to the diagrams below to identify all of the ports on your device when you make connections.

The DI-304/DI-304M Front Panel

Names and descriptions of your router’s front panel LEDs are given below:

9