NTI SERIMUX SERIES CONSOLE SWITCH
¾Login user to a port and connect the user port to a host port
Action (from Keypad)
1.Press USER
2.Enter the user number
3.Press PORT
4.Enter the user port number
5.Press PORT again
6.Enter the host port number
7.Press ENTER
Reaction of SERIMUX
-The LED “User” will illuminate.
-The port 0 LED will be illuminated, the other port LEDs will be OFF.
-The corresponding port LED will illuminate
-The LED "Port" will illuminate
-The corresponding port LED will illuminate. The other port LEDs will be OFF.
-The LED "Port" will illuminate
-The corresponding port LED will illuminate. The other port LEDs will be OFF.
-The User main menu will be displayed on the terminal application on the user port: (see Fig. 18 on page 21 )
-The administrator port (if connected) and the data traffic of any linked ports will be indicated by illuminating and flashing corresponding port LEDs respectively.
The user will be connected if:
–the specified user is enabled, and is not logged in;
–the specified ports are accessible to the user;
–the user port is not connected and the port type is “User”.
–the host port is not connected and the port type is “Host”.
¾Disconnect and logout a user
Action (from Keypad) | Reaction of SERIMUX | ||
1. | Press DISCON | - The LED “Discon” will illuminate. | |
2. | Press USER | - The LED “User” will illuminate. | |
3. | Enter the user number | - | The corresponding port LED will illuminate, the other port LEDs will be OFF |
4. | Press ENTER | - | The LEDs “Port", “Admin”, "User", and "Dison" will illuminate briefly. |
¾Connect 2 host ports
Action (from Keypad)
1.Press PORT
2.Enter the first port number
3.Press PORT again
4.Enter the second port number (to connect the first port number to)
5.Press ENTER
Reaction of SERIMUX
-The LED “Port” will illuminate.
-The port 0 LED will be illuminated. The other port LEDs will be OFF.
-The corresponding port LED will illuminate, the other port LEDs will be OFF
-The LED “Port” will illuminate. The port 0 LED will be illuminated, the other port LEDs will be OFF.
-The corresponding port LED will illuminate. The other port LEDs will be OFF.
-The administrator port and the data traffic between linked ports (if any) will be indicated by the corresponding LEDs.
The two host ports will be connected if:
–the ports are not connected
–the ports type is “Host”.
26
