87

k

D

Before Using the Remote Control

Before using the remote control for the first time, remove the clear plastic battery-insulator 

sheet.

D

Using the Built-in Flash 

Before taking a photograph with the flash in 

P

, 

S

, 

A

, 

M

, or 

0

 modes, press the 

M

 (

Y

) button to 

raise the flash and wait for the 

M

 indicator to be displayed in the viewfinder (

0

143). 

Shooting will be interrupted if the flash is raised while remote control mode is in effect or 

after the self-timer has started. If the flash is required, the camera will only respond to the 

ML-L3 shutter-release button once the flash has charged. In auto or scene modes in which 

the flash pops up automatically, the flash will begin charging when remote control mode is 

selected; once the flash is charged, it will automatically pop up and fire when required. Note 

that only one photograph will be taken when the flash fires, regardless of the number of 

exposures selected for Custom Setting c3 (

Self-timer

; 

0

227).

In flash modes that support red-eye reduction, the red-eye reduction lamp will light for 

about one second before the shutter is released. In delayed remote mode, the self-timer 

lamp will light for two seconds, followed by the red-eye reduction lamp which light for one 

second before the shutter is released.

A

Focusing in Remote Control Mode

The camera will not adjust focus in remote mirror-up mode or when continuous-servo 

autofocus is selected; note however that if any autofocus mode is selected, you can focus by 

pressing the camera shutter-release button halfway before shooting (pressing the button all 

the way down will not release the shutter). If auto- or single-servo autofocus is selected or 

the camera is in live view in delayed or quick-response remote mode, the camera will 

automatically adjust focus before shooting; if the camera is unable to focus in viewfinder 

photography, it will return to stand-by without releasing the shutter.

A

Remote Mirror-up Mode

Metering is not performed in remote mirror-up mode.

 

Photos can not be framed in the 

viewfinder while the mirror is raised.

A

A

Time (bulb) exposures can not be recorded using the self-timer. A fixed shutter speed will be 

used if a speed of 

A

 is selected in mode 

M

.

A

See Also

For information on choosing the duration of the self-timer, the number of shots taken, and 

the interval between shots, see Custom Setting c3 (

Self-timer

; 

0

227). For information on 

choosing the length of time the camera will remain in stand-by mode waiting for a signal 

from the remote control, see Custom Setting c5 (

Remote on duration

; 

0

228). For 

information on controlling the beeps that sound when the self-timer and remote control are 

used, see Custom Setting d1 (

Beep

; 

0

228).

Page 113
Image 113
Open full-size image