Nikon N90 instruction manual To USE NON-OX-CODED Film, IcS FS.6

TO USE NON-OX-CODED FILM

IcS	FS.6		IcS FS.6
EjH[!)Wf			.. 0 0:00
IDJ (	II	_
rn=:J m

The usable range for manual film speed setting is ISO 6 to

6400.

While pressing ISOl e", button, rotate command dial to set film's ISO number.

Film speed setting display changes as follows:

DX 6 8 10 12 16 20 25 32 40 50 64 80 100 125 160 200 250 320 400 500 640 800 1000 1250 1600 2000 2500 3200 4000 5000 6400

To check ISO number after film loading, press ISOl e", button.

To check ISO number after film loading, press ISO/e~ button.

•If non-OX-coded film or film with an unacceptable OX code is loaded, the Err , ISO and ffiJ marks blink in LCD panel , beeper sounds, and shutter is locked. You set ISO manually.

•You can manually set film speed for a OX-coded film, and the camera will automatically recognize the ISO number set, whether it is the higher, lower or actual ISO number:

•With the Data Link System, you can set the camera to OX-Priority.

100