Nikon N90 instruction manual Rewinding Film, EJ~Or!lF

REWINDING FILM

1 Film advance stops automatically at end of roll with End and Gl_ symbol in LCD panel blinking. (Audible beeper

sounds if set.)

At the end of film roll, each time you press shutter release button, End and Gl_ blink and audible beeper sounds (if set), reminding you to rewind film.

eJ~Or!lF

~

2 Press ~ button and ~ button to start film rewind. During film rewind, Gl _ appears on LCD panel, and frame

counter counts backwards until rewind is complete.

•You can rewind film, before it reaches end of roll, in the same manner.

•If film does not start rewind or if film rewind has stopped at mid-roll, check battery power. If battery power is insufficient, tum power switch off, replace batteries with a fresh set, tum power on, then press the film rewind and film speed setting/film rewind buttons again to restart film rewind.

•Do not open the camera back during film rewind. If the camera back is opened, film rewind will stop at mid-roll; to restart film rewind, press the <il-"!and ~ buttons again.

25