Nikon N90 instruction manual

Lightly press shutter release button to start autofocus

5 operation and switch exposure meter on .

Confirm that the in-focus indicator . for a stationary subject or

~.~for a moving subject appears on the viewfinder'sLCD readout. Confirm , too, that the shutter speed and aperture indications are shown. Exposure readouts also appear in the camera's external LCD panel.

In the Single Servo autofocus mode with Focus-Priority, the shutter cannot be released until . or ~.~ appears, indicating that the subject is in focus; the focus is then subsequently locked . If the distance between you and the subject changes, remove your finger from the shutter release button, then lightly press it again to refocus.

•In-focus indication for stationary subject

~<4 Focus Tracking (automatically activates) ~.~ In-focus indication for moving subject

<4 Subject is located closer than the lens'closest focusing distance. Move away from the subject and refocus.

~Appears when TC-16A is used, alerting that the lens focusing ring is not set at infinity H. See p.

36.

,I I I,

- ~ <4 - If ~ <4 blinks in the viewfinder: Autofocus is not

,I I I'possible (p. 44).

22