INSTALLING BATTERIES

Make sure the power switch is set at OFF position .

NiCd batteries that have "+" terminals exceeding 6mm in diameter cannot be used.

Manganese batteries are not recommended for use at low temperatures.

See page 133 for "NOTES ON BATTERIES."

3 Install four AA-type alkaline- manganese, NiCd or high-

performance manganese batteries with "+" and "-" terminals positioned as shown inside holder.

1 Loosen battery holder lock screw with a coin or similar object.

4 Retum battery holder to battery chamber.

2

5

Remove battery holder.

Press holder into place as you tighten lock screw with coin.

13

Page 13
Image 13
Nikon N90 instruction manual Installing Batteries