Nikon N90 instruction manual Sync will be performed

3 Press . reset button and . ill button simultaneously for two seconds until P, ~, [[] and 0 appear in the LCD

panel, indicating that the camera settings are automatically reset for basic shooting shown here:

Film advance:	Single frame (IIJ)
Metering system:	Matrix~)
Exposure control:	Auto-Multi Program (p)
Focus area:	Wide (E!l)
Flexible program setting:	Cancel
Exposure compensation:	±O
Flash sync mode:	Normal (If Speedlight is set at
	rear-curtain sync, rear-curtain
	sync will be performed.)

Data Link System users

When activating Custom Reset with the Nikon AC-1 E card 's Customized Settings function, press and hold the . and . ill buttons for two seconds to retrieve the Custom Reset settings.

When one or more functions/options (including Custom Reset) of the Customized Settings have been set, [mmJ appears in the camera's LCD panel'.To cancel the functions/options of the Customized Settings and reset your camera to the default setting (which will make [mmJ disappear from the LCD), press and hold the . and . ill buttons for more than four seconds until [mmJ starts blinking; then remove your fingers from the reset buttons and press them again within two seconds. (tmml stops blinking when the reset buttons are left untouched for two seconds.)

[mmJ also appears when "Store shooting data" is selected and/or "Download stored data" is likewise selected in the Memo Holder function. In this case, you also can make [mmJ disappear from the LCD by following the instuctions given above.

•When Custom Reset and/or "Simultaneous Lock of AF and AE" of User Custom Option is set with the MF-26 attached to the camera, [mmJ does not appear. To cancel Custom Reset or "Simultaneous Lock of AF and AE" with the MF-26, use the MF-26's(IlTImrT J button and the camera 's command dial. (For details, see the MF-26's instruction manual.)

20