INSTRUCTIONS FOR USE
INTRODUCTION | SPARE PARTS AND MAINTENANCE |
MANUAL PURPOSE AND CONTENTS
The purpose of this manual is to provide the Customer with all necessary information to use the machine properly in a safe and autonomous way. This includes information about technical characteristics, operation, machine inactivity, maintenance, spare parts and safety conditions. Before carrying out any procedure on the machine, the Operators and qualified Technicians must read this manual carefully. Contact the Manufacturer in case of doubts regarding the interpretation of the instructions and for any further information.
TARGET
This manual is intended for the Operator and the Technicians qualified for the machine maintenance.
The Operators must not carry out operations reserved for qualified Technicians. The Manufacturer will not be answerable for damages coming from the
HOW TO KEEP THIS MANUAL
The Instructions for Use must be kept near the machine, inside an adequate case, far from liquids and other substances that can cause damage to it.
IDENTIFICATION DATA
The machine model and serial number can be found on a plate (28, Fig. B) affixed to the machine steering column and readable from outside. The machine production year is shown after the date Code on the serial plate (A04 means January 2004).
This information is useful when requiring machine replacement parts. Use the following table to write down the machine identification data for any further reference.
MACHINE model .........................................................
MACHINE serial number .............................................
OTHER REFERENCE MANUALS
–Spare Parts List (supplied with the machine).
–Service Manual (that can be consulted at any
All necessary operating, maintenance and repair procedures must be carried out by qualified personnel or by
Call
CHANGES AND IMPROVEMENTS
Our Company constantly improves its products and reserves the right to make changes and improvements at its discretion without being obliged to apply such benefits to the machines that were sold previously.
Any modifications and/or addition of accessory must be approved and performed by the Manufacturer.
SAFETY
The following symbols indicate potentially dangerous situations. Always read this information carefully and take the necessary precautions to protect people and objects. The machine Operator's cooperation is essential in order to prevent injury. No accident prevention program is effective without the total cooperation of the person responsible for the machine operation. Most of the accidents that may occur in a factory, while working or moving around, are caused by failure to comply with the simplest rules for exercising prudence. A careful and prudent Operator is the best guarantee against accidents and is essential for successful completion of any prevention program.
SYMBOLS
DANGER!
It indicates a dangerous situation (risk of death) for the Operator.
WARNING!
It indicates a potential risk of injury for people.
CAUTION!
It indicates a caution or a remark related to important or useful functions. Pay particular attention to the paragraphs marked by this symbol.
CONSULTATION
Consult the Instructions for Use before performing any operation.
2 | Terra™ 5200B – 146 1996 |
