INSTRUCTIONS FOR USE

GENERAL INSTRUCTIONS

Specific warnings and cautions to inform about potential damages to people and machine are shown below.

DANGER!

To perform maintenance/repair procedures turn the machine ignition key to OFF position and disconnect the battery.

This machine must be used by qualified and authorized personnel only. Children or disabled people cannot use this machine.

Keep the battery far from sparks, flames and smoke. During the normal operation explosive gases are delivered.

Do not wear jewelry when working near electrical components.

Do not work under the lifted machine, if it is not securely fixed.

Each time you work under the open hood, ensure that the hood cannot close by accident.

Do not operate the machine near dangerous, inflammable and/or explosive powders, liquids or vapors.

Battery charging produces explosive hydrogen gas. Keep the hood open during battery charging and perform this operation only in well-ventilated areas and far from naked flames.

WARNING!

Carefully read all the instructions before performing any maintenance/repair procedure.

Take all necessary precautions to prevent hair, jewelry and loose clothes from being caught by the machine moving parts.

Do not smoke during battery charging.

Do not leave the machine unattended with the ignition key inserted and the parking brake disengaged.

Do not use the machine on surfaces with a gradient greater than the one indicated on the machine.

Do not wash the machine with direct or pressurized water jets or corrosive substances. Do not use compressed air to clean this type of machine except for filters (see related paragraph).

While using this machine, take care not to cause damage to people and children especially.

Do not put any can containing liquids on the machine.

The storage temperature must be between +32°F and +104°F (0°C and +40°C).

The machine must be used at a temperature between +32°F and +104°F (0°C and +40°C).

The humidity range should be between 30% and 95%.

Always protect the machine against the sun, rain and bad weather, both under operation or inactivity condition.

The machine cannot be used for towing or pushing objects and/or loads. Do not use the machine as a means of transport; the machine maximum capacity is 242.5 lb (110 kg), besides the weight of the operator.

Do not allow the brooms to operate while the machine is stationary to avoid damaging the floor.

In case of fire, use a powder extinguisher. Do not use water.

Do not bump into shelves or scaffoldings, in particular where there is a risk of falling objects.

Adjust the operation speed to suit the floor conditions.

This machine cannot be used on public roads.

Do not tamper with the machine safety guards; follow the routine maintenance instructions scrupulously.

Do not remove or modify the plates affixed on the machine.

In case of machine malfunctions ensure that these are not caused by a lack of maintenance. Otherwise, request assistance from the authorized personnel or the Service Center.

If parts must be replaced, require ORIGINAL spare parts from a Dealer or Authorized Retailer.

To ensure the machine proper operation and safety conditions, the authorized personnel or the Service Center must carry out the scheduled maintenance detailed in the related chapter of this manual.

The machine must be disposed of properly, because of the presence of toxic-harmful materials (batteries, oils, plastics etc.), which are subject to standards that require disposal in special centers (see the Scrapping chapter).

If the machine is used according to the instructions, the vibrations do not cause dangerous situations. The machine vibration level is under 2.7 yd/s2 (2.5 m/s2) (EN 1032-96/A1-98).

Do not tilt the machine more than 30° from its horizontal position, or the highly corrosive acid could leak out of the batteries. When it is necessary to tilt the machine for maintenance, remove the batteries.

UNPACKING

On delivery, carefully check that the machine and its packing were not damaged during transportation. If the damages are evident, keep the packing and have it checked by the Parcel Service that delivered it. Call the Parcel Service immediately to fill in a request for a compensation for damages.

Please check that the following items have been supplied with the machine:

Technical documents:

Instructions for Use

Spare Parts List

No.1 150 A (FO) main fuse

Battery connector

146 1996 000(2)2004-08Terra™ 5200B

3

Page 5
Image 5
Nilfisk-Advance America 5200B manual Instructions for USE General Instructions, Unpacking

5200B specifications

The Nilfisk-Advance America 5200B is a powerful and reliable walk-behind scrubber designed for efficiency and performance in a variety of cleaning environments. This machine is particularly well-suited for medium-sized to large facilities such as schools, hospitals, retail spaces, and warehouses, where cleanliness is paramount.

One of the standout features of the Nilfisk 5200B is its robust design, which incorporates durable materials to withstand the rigors of constant use. It boasts a compact frame that allows for excellent maneuverability in tight spaces while still maintaining a generous cleaning path. The machine is equipped with a 20-inch scrubbing width, enabling it to cover significant ground in a single pass.

The 5200B uses advanced scrub technologies that enhance its cleaning capabilities. One notable innovation is its dual brush system, which delivers superior scrubbing power and provides effective cleaning on various floor surfaces, including tile, concrete, and vinyl. The adjustable brush pressure feature allows operators to customize the scrubbing intensity based on the specific needs of the flooring and environment.

Efficiency is a key concern for any cleaning operation, and the 5200B addresses this through its impressive water management system. The machine is designed to optimize water usage, reducing waste and promoting eco-friendly cleaning practices. Its solution control feature allows for precise dispensing of cleaning solution, ensuring that the right amount is used for every job, further enhancing both efficacy and cost savings.

In terms of user comfort, the Nilfisk 5200B is equipped with an ergonomic handle and easy-to-use controls that minimize operator fatigue during extended cleaning sessions. The intuitive dashboard provides real-time feedback and monitoring, making it simple for users to track maintenance needs and performance metrics.

Another significant characteristic of the 5200B is its low noise level, which makes it ideal for use in noise-sensitive areas. This means that cleaning can be performed during business hours without disrupting customers or staff.

With its blend of robust construction, advanced cleaning technologies, and user-focused features, the Nilfisk-Advance America 5200B is an outstanding choice for organizations seeking an efficient and effective cleaning solution. This machine not only enhances cleanliness but also contributes to a safer and more pleasant environment for all who inhabit the spaces it cleans.