Camera
82
To return to the viewfinder to capture a new image, press the capture key.
Flash
The flash is available only in the main camera. Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a picture.
The camera of your device has a dual LED flash for low light conditions.
Select the desired flash mode from the active toolbar: Automatic ( ), 
).
Scenes
Scenes are only available in the main camera. A scene helps you to find the right colour and lighting settings for the current environment. The settings of each scene have been set according to a certain style or environment.
The default scene in the image mode is Auto, and in the video mode Automatic (both indicated with 
).
To change the scene, in the active toolbar, select Scene modes and a scene.
To make your own scene suitable for a certain environment, scroll to User defined, and select Options > Change. In the user defined scene you can adjust different lighting and colour settings. To copy the settings of another scene, select Based on scene mode and the desired scene. To save the changes and return to the scenes list, press Back. To activate your own scene, scroll to User defined, press the scroll key, and select Select.
Capture images in a sequence
The sequence mode is available only in the main camera.
To set the camera to capture images in sequence (if enough memory is available), in the active toolbar, select Sequence mode.
To start capturing images in a quick sequence, selectBurst, and press and hold the capture key. The device captures images until you release the key or until the memory runs out. If you press the capture key briefly, the device captures six image in a sequence.
To capture two or more images in defined intervals, select the desired time interval. To capture the images, press the capture key. To stop capturing images, select Cancel. The number of images taken depends on the available memory.
