Personalise your device
50
standby mode. Scroll to the profile you want to activate, and select OK.
Tip: To switch between the general and silent profiles in the standby mode, press and hold
#.
To modify a profile, scroll to the profile, and select Options > Personalise. Scroll to the setting you want to change, and press the scroll key to open the choices. Tones stored on a compatible memory card (if inserted) are indicated with 
.
If you want to set a profile to be active a certain time, select Options > Timed. When the set time expires, the profile changes back to the previously active one. When a profile is timed, is displayed in the standby mode. The Offline profile cannot be timed.
In the tones list, select Download sounds (network service) to open a list of bookmarks. You can select a bookmark and open a connection to a web page to download more tones.
If you want the caller’s name to be spoken when your device rings, select Options > Personalise > Say caller's name > On. The caller’s name must be found in Contacts.
To create a new profile, select Options > Create new.
3-D tones 
Press 
, select Tools > Utilities > 3-D tones.
With
To enable the
To change the
To modify the effect, select from the following settings:
●Trajectory speed — Scroll left or right to adjust the speed at which sound moves from one direction to another. This setting is not available for all ringing tones.
●Reverberation — Select the type of echo.
●Doppler effect — Select On to have the ringing tone sound higher when you are closer to your device, and lower when you are farther away. When you get closer to the device, the ringing tone seems to become higher, and lower when you move away from it. This setting is not available for all ringing tones.
To listen to the ringing tone with the
