Camera |
| an account for a compatible online album). See " | |
| clip, press the capture key. |
| |
|
| Share images and videos online ", p. 96. | |
| ● To return to the viewfinder to record a new video | ||
Camera settings
There are two kinds of settings for the camera: setup settings and main settings. The setup settings return to the default settings after you close the camera, but the main settings remain the same until you change them again. To adjust the setup settings, use the options in the active toolbar. See "Colour and lighting settings", p. 87. To change the main settings, in the image or video mode, select Options > Settings.
Still image camera settings
To change the main settings, in the image mode, select Options > Settings and from the following:
●Image quality — Set the resolution (main camera only). The better the image quality, the more memory the image consumes.
●Add to album — Save the image to an album in Photos.
●Record location — To add GPS location
coordinates to each image file, select Yes.
86Receiving a GPS signal may take time or the signal
may not be available. See "Location information", p. 81.
● Show captured image — Select whether to view the captured image after it is taken or to continue image capturing immediately.
● Default image name — Define the default name for the captured images.
● Extended digital zoom — The setting is only available in the main camera. On (continuous) allows the zoom increments to be smooth and continuous between digital and extended digital zoom, On (paused) allows the zoom increments to pause at the digital and extended digital step point, and Off allows a limited amount of zoom while retaining the image resolution. Use the extended zoom only when getting closer to the subject is more important than the final image quality. The overall quality of a digitally zoomed image is always lower than that of an unzoomed image.
● Capture tone — Set the tone that sounds when you capture an image.
● Memory in use — Select where to store your images.
● Rotate image — Select whether you want images that are captured when the device is held upright to be rotated when you open them in Gallery.
● Restore camera settings — Restore the camera settings to default values.
