Installation
DRAFT
E Copyright Nokia Telecommunications Oy
NTC C33539002SE_A0 4-1
Chapter 4Installation
This chapter presents a step-by-step installation example procedure
for three different application examples of Nokia M10:
DInternet access (NAPT router)
DRemote work (basic router)
DLAN interconnection (basic bridge)
These installation procedures are examples to guide you through some
of the typical use cases.
The installation examples assume that you have a new M10 with a
factory default configuration. The complete default configuration is
presented in the end of this chapter. The default settings are, briefly:
DSingle ADSL/ATM channel (VPI = 0, VCI = 100)
DPPP over ATM/AAL5 encapsulation
DM10 retrieves IP address configuration from the IP network using
PPP-IPCP negotiation
DNetwork Address Port Translation activated
DPrivate IP addresses in use in LAN
DDHCP server for the LAN interface activated
Before starting the installation, unpack the unit and check that it is
physically undamaged.

4.1 Internet access (NAPT router)

This application is based on the default configuration of the Nokia
M10. By default, Nokia M10 is an Internet access device that uses