Installation
DRAFT
Copyright Nokia Telecommunications Oy
NTC C33539002SE_A0 4-21

Step 5: Check that the connection works

Establish a connection to the office server to check that the connection

works.

4.4 Default settings

The table below indicates the default settings for Nokia M10. By

default, Nokia M10 works as a plug and play unit for Internet access

application. Node and Subnode refer to Config command hierarchy

nodes (see Chapter 5).

Node Subnode Parameter M10 default
System System name M10
System Diag-
nostic Level 3 (high)
System Name
Password/
User
<empty>
System Name
Password/
Admin
<empty>
CLI Verbose OFF
CLI Lines 16
ATM Option ON
Empty Cell
Header Value 0x00000001
Empty Cell
Payload Value 0x6A6A6A6A
ATM HEC
Coset ON
Payload
Scrambling ON
ATM VCC Op-
tions (8) ON (VCC1), others
OFF
VCI (VCC1) 100
VPI (VCCI1) 0
Encapsulation
(VCC1) ppp-vcmux
BNCP Option OFF
PPP Option ON