Management
DRAFT
E Copyright Nokia Telecommunications Oy
NTC C33539002SE_A0 5-25
The only command you cannot truncate is restart. To prevent
accidental interruption of communications, you must enter the
restart command in its entirety.
You can use the !! command to repeat the last command you entered.
You can press the Ctrl-P or Esc-k key sequences to obtain the same
result.
Root commands
You can get a list of the Root commands by typing ? in the Root
prompt.
Dhelp command to get help
Dconfigure command to configure unit’s options
Dping command to send ICMP Echo request
Datmping command to send ATM OAM loopback
Darp command to send ARP request
Dquit command to quit shell
Dreset command to reset subsystems
Drestart command to restart unit
Dshow command to show system information
Dtelnet command to telnet to a remote host
Dwho command to show who is using the shell
Dlog command to add a message to the diagnostic log
Dloglevel command to report or change diagnostic log level
Dinstall command to download and program an image
into flash
Ddownload command to download a config file
Dupload command to upload a config file
Dclear command to erase all stored configuration
information
The following tables present the Root commands, their detailed
descriptions, syntax and usage examples.