While on an active call
While on an active call
This section describes the following features, available during an active call:
•“Placing a call on hold” on page 78
•“Transferring a call” on page 79
•“Using Timed Reminder Recall” on page 80
•“Using Attendant Recall” on page 81
•“Using Call Park” on page 82
•“Recording a Calling Party Number” on page 84
•“Displaying incoming call information” on page 84
•“Tracing a malicious call” on page 85
Placing a call on hold
Use the Hold feature when you are talking on one line and another call arrives on a second line. Retain the original call by putting it on hold and then answer the second call.
To place a call on hold:
(Hold)
To retrieve a call on hold:
Press the Hold key. The LCD indicator flashes beside the line on hold.
Note: If Automatic Hold is enabled, the active call is automatically put on hold when you answer the second call.
Press the line (DN) key beside the flashing LCD indicator.
78
