Optional Equipment
Optional equipment includes system printers and the Bar Code Reader.
System Printers
Cabling for system printers is slightly different for standalone and network configurations.
Standalone Printer{ XE "Standalone installation:Printer (optional)" }
Unpack the printer and place it on the printer cabinet (a separate piece of furniture). Follow the instructions in the manufacturer's user manuals and install the printer as a parallel device. Use the
For cabling instructions, do the following.
1.Attach the power cord.
•Plug the female end into the back of the printer.
•Plug the male end into the power strip (or wall outlet).
2.Attach the parallel interface cable.
•Plug the male end of the parallel interface cable into the appropriate port on the back of the printer.
•Plug the other end of the cable into the appropriate port labeled LINE PRINTER located on the lower
Network Printer{ XE "Network installation:Printer (optional)" }
Unpack the printer and place it on the printer cabinet (a separate piece of furniture). Follow the instructions in the manufacturer's user manuals and install the printer as a parallel device, using the parallel interface cable to connect the printer to the network server or to a port located on the back of the scanner.
For cabling instructions, do the following: (See Figure 3.5.)
1.Attach the power cord.
•Plug the female end into the back of the printer.
•Plug the male end into the power strip.
2.Attach the parallel interface cable.
•Plug the male end of the parallel interface cable into the port on the back of the printer.
•Plug the other end of the cable into the appropriate port on the back of the network server or to a port labeled LINE PRINTER located at the bottom of the scanner's rear panel.
Chapter 3. Computer and Peripherals Installation | Page 33 |
