Nortel Networks 5000i manual Revision Log, Tab/Rev Date Description, Iii

Revision Log

Tab/Rev Date	Description
12/96	Manual Released

01904/97 Deleted all instances of the term NCS where it refers to the product except for the first instance in the preface, p. v.

Trademarked the first instance of 5000i, cover page.

Added instructions for installing the Catgut board in the microcomputer, pp. 16 and 20.

Updated microcomputer installation instructions, pp. 16 and 20. Updated Figure 3-5 illustrating cable connections, p. 25.

Updated NCS responsibilities for periodic maintenance in the “Customer Hand-off” section, p. 30.

Added Quick Check to the “Customer Hand-off” section, p. 31.

02710/01 Changed 5000i™ to 5000i. Changed NCS to NCS Pearson.

Changed National Computer Systems to NCS Pearson, Inc.

Changed Customer Support Services Division to Customer Support. Changed Image ScanTools to Image ScanTools™.

Reformatted manual.

Edited text to reflect changes in hardware and software; e.g. changed Scanex utility to Scanner Exerciser Utility, updated other menu selections to reflect software changes.

Updated physical dimensions of 5000i from 33” x 40” x 24” t “57.5” x 48” x 29”, p. 6.

Added note under Cabling, Step 5: “Connect this cable to the 15-pin connector on the video card in the first expansion slot. Do not connect to the 15-pin connector on the system board.” p. 17 and under

Cabling, Step 6, p. 22.

Changed “Connect the other end (5 BNCs) to the back of the monitor labeled” to “Connect the other end (15-pin) to the back of the monitor,” and removed the list of monitor labels, pp. 18 and 25.

Updated Figure 3-2 illustrating changes in Standalone Board/Connector Locations, p. 19.

Updated Figure 3-4 illustrating changes in Network Board/Connector Locations, p. 24.

Added to Cable Part Numbers and Connections Table: “913 406 005, Gender Changer, HD 15 Female/Female/NA,” p. 25.

Added to Customer hand-off, step 1, “Output Hopper Height Adjustment Switch – Adjusts the input hopper up or down,” p. 30.

Changed “ImageTool” to “Image ScanTools™,” p. 30. Changed microcomputer to computer.

Publication Number 202 234 027

iii