44Using the User menu

Step Action

1From the main menu, open the User menu.

2From the User menu, select and open Login Type.

The Unique screen appears. If Unique is enabled, Ok appears above the far left soft key.

3Press the down navigation key to view the Joint screen. If Joint is enabled, Ok appears above the far left soft key.

--End--

Viewing, disabling, or enabling the auto login feature

Follow this procedure to view, enable, or disable the Auto Login feature.

Any maintenance activity, for example a firmware upgrade, forces a log off from the network. If you enable auto login, you are automatically logged on to the IP Client Manager when the terminal is available again.

Prerequisites

You must have permission to edit the auto login feature. If you have permission, a check mark appears next to Enabled when the screen appears.

Step Action

1From the main menu, open the User menu.

2From the User menu, select and open Auto Login.

The Auto Login screen appears displaying your Auto Login profile.

If you do not have permission to edit this feature, the procedure is complete.

3If you have permission to edit this feature, press Ok.

The Enabled screen appears. A check mark appears if the feature is enabled.

4Perform one of these actions:

To enable Auto Login, select Enable.

To disable Auto Login, select Disable.

5Press Ok.

Carrier VoIP

Nortel IP Phone 2004 User Guide (CICM)

NN10300-009 09.01 Standard

4 July 2008

Copyright © 2008 Nortel Networks

Page 44
Image 44
Nortel Networks NN10300-009 manual Viewing, disabling, or enabling the auto login feature, Using the User menu