.

57

While on an active call

This section describes features available during an active call.

Placing a call on hold

The Hold feature allows you to suspend a call without terminating it. Follow this procedure to use the hold feature.

To place a call on hold, press the Hold key. The LCD indicator flashes beside the line on hold.

To retrieve a call on hold, press the line (DN) key beside the flashing

LCD indicator.

Using the mute feature

Muting prevents the transmission of sounds through the microphone.

Follow this procedure to use the mute feature.

1.A red light next to the green, circular Handsfree button means that your speaker phone is turned on.

2 Press the Mute key located under your volume control bar.

3A red light appears next to the Mute key, meaning your speaker phone is turned on, but the microphone is off and the caller cannot hear you.

Transferring a call

Follow this procedure to transfer a call to another extension.

Carrier VoIP

Nortel IP Phone 2004 User Guide (CICM)

NN10300-009 09.01 Standard

4 July 2008

Copyright © 2008 Nortel Networks

Page 57
Image 57
Nortel Networks NN10300-009 While on an active call, Placing a call on hold, Using the mute feature, Transferring a call