81
You can program memory buttons for one-touch dialing of
internal or external telephone numbers.
External
1.
Press [Feature]
2.
Select the button you want to program. This is not necessary
for the Telephone.
3.
If you want this autodialer to use a particular line or line pool,
select that line or line pool button. On the Telephone,
you can only select a line pool button .
4. Enter the number.
5.
Press or [Hold].
Internal
1.
Press
2.
Select the button you want to program. This is not necessary
for the Telephone.
3. Enter the number.
Displays
You will see some of the following displays while programming
an button. See Dialing for displays that may occur while
using an button.
Continue to enter digits until the
BKSP OK number is complete. Press or
to erase an incorrect
digit. Press or (Hold] when you
are finished.
The memory allotted to
numbers in your system is full.
PO842627 01
DR5.1 Owner’s Handbook