Novatel OM-20000122 user manual Hardware Set Up, Typical SPAN-CPT Set Up Radio COM2

Chapter 2 SPAN-CPT Installation

2.2Hardware Set Up

Complete the following steps to set up the NovAtel SPAN system.

Figure 3: Typical SPAN-CPT Set Up

Radio (COM2)

(optional for Real Time Differential operation)

6

5

4

1.Mount the GNSS antenna, as described in Mount the Antenna on page 15.

2.Mount the SPAN-CPT, as described in Mount the SPAN-CPTon page 15.

3.Connect the GNSS antenna to the SPAN-CPT, as described in Connect the GNSS Antenna on page 16.

4.Connect power to the SPAN-CPT, as described in Connect Power on page 16.

5.Connect a computer to the SPAN-CPT, as described in Connect a Computer to the SPAN-CPTon page 17.

6.Connect the serial port on the user supplied radio device (optional for real-time differential operation) to the COM2 port available on the multi-purpose I/O connector.

7.Connect the I/O strobe signals (optional), as described in Connect the I/O Strobe Signals on page 17.

NovAtel recommends biasing unused inputs to their default states.

14 SPAN-CPT User Manual Rev 8