Chapter 5 | NovAtel Firmware and Software |
|
|
5.3.2Using the WinLoad Utility
If opening WinLoad for the first time, ensure the file and communications settings are correct.
Open a File to Download
Select File Open. Navigate to the file to open (Figure 12, WinLoad’s Open Window).
Figure 12: WinLoad’s Open Window
When a file is selected, the filename appears in the main WinLoad display area and in the title bar (Figure 13, Open File in WinLoad).
Figure 13: Open File in WinLoad
Communications Settings
To set the communications port and baud rate, select Settings COM Settings. Choose the computer port to use from the Com Port drop down list and the baud rate from the Download Baudrate drop down list. Set the baud rate as high as possible (the default of 115200 and is preferred).
Figure 14: COM Port Setup
Downloading Firmware
1.Select the file to download according to Open a File to Download on page 44.
2.Ensure the file path and name are displayed in main display area (see Figure 13, Open File in WinLoad on page 44).
3.Click Write Flash to download the firmware.
4.When Searching for card appears in the main display, power cycle the receiver.
44 |
