Nuance comm D60707-18 manual Introduction, SafeCom Go Canon, Requirements

1 Introduction

1 Introduction

1.1SafeCom Go Canon

SafeCom Go Canon is the internal solution for Canon MFPs. It integrates with the touch-screen control panel of the Canon MFP and offers user authentication by code and/or card.

SafeCom Go Canon works together with the SafeCom G4 Server software and is designed to help companies and organizations gain control over their printing costs and document security. The SafeCom solution can be enhanced with add- on modules to build customer specific and scalable solutions.

1.2Requirements

∙SafeCom Go Canon supports the MEAP-enabled Canon MFPs in Table 1. The MFPs are listed in order of release with the latest at the bottom.

∙Built-in USB port for connection of USB ID Device is featured on all newer MFPs. Older MFPs may require a Canon USB Application Interface Board (type B1, D1 or G1) and/or any additional Canon hardware.

∙MFP must be connected to the network.

∙The MFP should set department ID as off.

∙The MFP should not have system administrator setting.

∙SafeCom device license and Canon MEAP License (royalty fee paid to Canon).

∙Canon Access Management System Kit-A2 (AMS) is required to control user's access rights for: Copy, Copy in color, E-mail, Scan and Fax.

D60707-18 4