Oki 4410 manual Menu Mode Configuring Your Printer, Entering/Exiting the Menu Mode

Menu Mode: Configuring Your Printer

Entering/Exiting the Menu Mode

To enter or exit the menu mode, press MENU.

Changing the Menu Settings

To change menu settings:

1.Press MENU to place the printer in the menu mode.

2.Press GROUP until the group in which you wish to make a change appears on the second line of the display.

3.Press ITEM until the item which you wish to change appears on the display.

4.Press OPTION until the value you wish to set for that item appears on the second line of the display.

5.Press STORE to save the setting.

An asterisk (*) will appear next to the value on the display.

6.Repeat steps 2 through 5 for each item you wish to change in the menu.

7.Press MENU to exit the menu mode.

For example, to change to 12 cpi pitch:

1.Press MENU.

2.Press GROUP until Font appears on the display.

3.Press ITEM until Pitch appears on the display.

4.Press OPTION until 12 CPI appears on the display.

5.Press STORE.

An asterisk (*) appears next to 12 CPI.

6.Press MENU.

Saving Configurations

You can establish two user-defined groups of menu settings—CFG1 and CFG2—then switch back and forth between them.

When you first start up your printer, both CFG1 and CFG2 are set to the same settings as the factory settings. You will see CFG1 (Configuration 1) at the end of the second line of the printer display.

If you enter the menu and change settings, the new settings will automatically be stored under the configuration—CFG1 or CFG2—which appears on the second line of the display when you make the changes.

11