Oki 4410 manual Group, Settings

Group	Item	Settings
Set-Up (cont.)	LF Speed	Fast, Slow
	Width Control	Invalid, Mode 1, Mode 2
Parallel I/F	I-Prime	Invalid, Buffer Print, Buffer Clear
	Pin 18	+5V, Open
	Auto Feed XT	Valid, Invalid
	[Epson emulation only]
	Bi-Direction	Enable, Disable
Serial I/F	Parity	None, Odd, Even
	# Serial Bits	8 Bits, 7 Bits
	Protocol	Ready/Busy, X-ON/X-OFF
	Diagnostic Test	No, Yes
	Busy Line	SSD-, SSD+, DTR, RTS
	Baud Rate	9600 BPS, 4800 BPS, 2400 BPS, 1200 BPS,
		600 BPS, 300 BPS, 19200 BPS, 38400 BPS
	DSR Signal	Valid, Invalid
	DTR Signal	Rdy on Pwr Up, Ready on Select
	Busy Time	200 ms, 1 sec

16