Oki 4410 manual Replacing the Power Fuse, If the paper continues to jam

If the paper continues to jam...

If you continue to experience paper jams, there are probably some inaccessible pieces stuck in the paper path. To correct this:

1.Press the PARK button to retract the paper from the paper path.

2.Open the rear-feed access cover.

3.Fold some continuous forms paper over three times to form a thick “sheet,” then load the sheet on the tractors, and press FF/LOAD. The sheet will feed into the printer,

pulling any loose pieces through the path and out into the printhead area.

4.Remove the pieces, then press FF/LOAD and remove the thick paper.

5.Reload your regular continuous forms and close the rear-feed access cover.

6.Press FF/LOAD.

Replacing the Power Fuse

To replace the power fuse:

1.Turn the printer off and unplug it from the outlet.

2.Turn the fuse housing (1) to the left and remove it from the printer.

3.Replace the fuse and reinstall the fuse housing in the printer.

4.Plug the printer back in and turn it on.

28