Oki 4410 manual Description, Emulations, Groups

Item	Description	Emulations	Group(s)
Registration 1	Change the setting as required to obtain the	All	Set-Up
through	best registration for bi-directional printing.
Registration 7	Each time you press OPTION, the next
	setting appears on the display and the
	printer prints a sample showing the
	alignment for that setting. Press STORE to
	select the setting with the best alignment
	(asterisk appears next to the setting)
	before exiting the menu.
Reset Inhibit	Change to Yes to prevent your software	All	Set-Up
	from resetting your printer’s settings.
SI Pitch (10)	Sets the pitch to be engaged when the	IBM only	Set-Up
	printer control panel is set for 10 cpi and
	the SI command is received.
SI Pitch (12)	Sets the pitch to be engaged when the	IBM only	Set-Up
	printer control panel is set for 12 cpi and
	the SI command is received.
Size	Change to Double for double width and	All	Font
	height printing.
Skip Over Perf.	Change to Yes if you want the printer to	All	Rear Feed,
	go to the next page when it comes within		Front Feed
	1" (25 mm) of the bottom of the page.
	Keep it set to No if your software has its
	own page formatting controls.
Style	Change to italics if you want the printed	All	Font
	characters to be slanted.
Time Out Print	If your software spends a long time pro-	All	Set-Up
	cessing between portions of data it feeds
	to the printer, change the setting to Invalid
	to keep your printer from printing the
	received data while it is waiting for more.
Width Control	Used to limit printhead travel. Select	All	Set-Up
	Mode 1 to wrap print lines which exceed
	the width of the paper. Select Mode 2 to
	cut off the end of print lines which exceed
	the width of the paper.
Zero Character	If you do not want the printer to use a slash	All	Symbol Sets
	to distinguish a zero from the capital letter
	O, change the setting to Unslashed.

21