Oki 4410 manual Description, Emulations, Groups

Item	Description	Emulations	Group(s)
Host Interface	If you wish to select a dedicated interface	All	Set-Up
	rather than having the printer automatically
	detect the interface being used, select
	parallel, serial, OKI HSP (appears only if
	the print server is installed), or Opt. Card
	(appears only if optional card is installed).
I/F Time Out	Sets the length of time the printer will	All	Set-Up
	wait for additional data to be received
	at the interface.
Impact Mode	Change to Quiet for minimum sound;	All	Set-Up
	change to Hi-Impact Copy for forms
	thicker than 7-part carbonless.
Intr Chr Sub St	International Character Sub Set: change	Epson only	Set-Up
	to Code page Only if you wish the
	printer to ignore the Language Set.
I-Prime	Determines what the printer will do	All	Parallel I/F
	when it receives the I-Prime signal from
	the software: Buffer Print prints out the
	buffer contents before resetting; Buffer
	Clear dumps the buffer contents
	immediately. Invalid causes the printer
	to ignore the I-Prime command.
Language Set	Replaces certain standard symbols with	All	Symbol Sets
	special characters used in foreign
	languages.
LF Speed	Change to Slow if you wish to reduce the	All	Set-Up
	speed with which the printer executes the
	line feed command when using thicker
	forms.
Line Spacing	Change to 8 lines per inch to get more	All	Rear Feed,
	lines per page.		Front Feed
Op. Panel	Operator Panel Function: Change to	All	Set-Up
Function	Limited Operation to deactivate the
	MENU, GROUP, ITEM, OPTION,
	STORE and CONFIG buttons. This
	prevents these from being changed from
	the control panel when several people
	are using the printer.
Page Length	Sets the length of the continuous forms	All	Rear Feed,
	you are using.		Front Feed

19