Oki 4410 manual Explanation of Menu Settings

Explanation of Menu Settings

The items in the table below are arranged in alphabetical order.

Item	Description	Emulations	Group(s)
# Graphic Bits	Choose the graphics your system uses:	ML only	Set-Up
	7 or 8 dots in each column printed.
# Serial Bits	Change to 7 Bits if your system uses a	All	Serial I/F
	7-bit data format.
Auto CR	If you want the printer to automatically add	IBM only	Set-Up
	a carriage return when a Line Feed is
	received at the end of a line, change the
	setting to Yes.
Auto Feed XT	If your system uses pin 14 of the parallel	Epson only	Parallel I/F
	interface to control automatic line feed,
	change the setting to Valid.
Auto LF	If your printout is consistently double	All	Set-Up
	spaced, select No; if it overprints, select Yes.
Auto Path	Invalid = paper path controlled by software;	All	Set-Up
	Valid = paper path controlled by printer;
	paper automatically switches to the alternate
	path when current paper runs out.
Auto Select	If you always use the same Top of Form	All	Set-Up
	position, change the setting to Valid.
Baud Rate	Sets the data transmission speed for the	All	Serial I/F
	serial interface.
Bi-Direction	Change to disable if you wish to	All	Parallel I/F
	disengage bi-directional communication at
	the parallel interface.
Busy Line	If the Ready/Busy protocol (factory setting)	All	Serial I/F
	is selected, use this to select which line your
	system monitors for a busy signal.
Busy Time	Sets the length of the busy signal when the	All	Serial I/F
	Ready/Busy protocol (factory setting) is
	engaged.
Character Set	Determines the character set the printer uses.	All	Symbol Sets
Code Page	Sets the Code Page set the printer uses:	All	Symbol Sets
	which selections appear depends on the
	emulation selected.

17