Oki 4410 manual D Hex Dump Mode, Running a Hexadecimal Dump, Engaging the Hex Dump Mode

D: Hex Dump Mode

Running a Hexadecimal Dump

When the printer is in the Hex Dump Mode, all data received, including text and printer commands, will be printed in both hexadecimal and ASCII format.

Note: In the ASCII format, all non-printable characters will be represented by a period.

Engaging the Hex Dump Mode

To engage the Hex Dump Mode:

1.Be sure paper is loaded.

2.Turn the printer off.

3.Press and hold FF/LOAD while turning the printer on.

The printer will print the line “Hex Data Dump” and be ready to receive data in the Hex Dump Mode.

Running a Hex Dump Test

To run the test, send data to the printer while it is in the Hex Dump Mode.

Exiting Hex Dump Mode

There are two ways to exit the Hex Dump Mode:

•Hold SHIFT and press ON-LINE/RESET .

OR

•Turn the printer off, then on again.

111