>To remove a sheet from the central area of the belt, carefully separate the sheet from the belt surface and withdraw the sheet.

1

>To remove a sheet just entering the fuser , separate the trailing edge of the sheet from the belt, push the fuser pressure release lever (1) towards the front and down to release the fuser’s grip on the sheet, and withdraw the sheet through the drum cavity area. Then allow the pressure release lever to rise again.

NOTE:

If the sheet is well advanced into the fuser (only a short length is still visible), do not attempt to pull it back. Follow step 12 to remove it from the rear of the printer.

10.Starting with the cyan image drum unit nearest the fuser, replace the four image drums into the drum cavity, making sure to locate them in the correct order.

1

2

3

4

1.

Cyan cartridge

2.

Magenta cartridge

3.

Yellow cartridge

4.

Black cartridge

Troubleshooting > 109