PLACING DOCUMENT(S) ON THE GLASS

1.Open the document cover.

2.Place your document with the text face DOWN on the glass and align it to the upper-left corner.

This

is

 

to

 

testtext

face-

 

 

demonstratedown

 

 

 

text

3.Close the document cover.

COPY MODE

You can make a single copy of a document, either from the ADF or from on the glass by pressing the mono or colour button on the operator panel.

SETTING UP

1.Press enter button

2.Select required parameter with Down arrow key and press Enter.

3.Using up or down arrow keys, select value and press Enter.

Options are (factory default settings in bold text): Copies: Select number of copies in the range 1 - 99.

Reduce/enlarge: Select from a pre-determined figure: A4>A5 (70%), Leg>Let (78%), Fit to page (98%), 100%, B5>A4 (115%), Let>Leg (127%), A5>A4 (141%), or set to a percentage in increments of 1% by using the Custom (25%~400%) setting.

Paper Size: Select from: Legal, Letter, A4, A5, B5.

Operation > 59