12.Gently push the board into the RAM expansion slot until it latches in and will not go any further.

a

b

13.Close the RAM expansion slot.

14.Replace the belt and image drum units.

15.Close the printer top cover and press down firmly so that the cover latches closed.

16.Gently lower the scanner on to its supports.

17.Reconnect the AC power cable and switch the MFP on.

CHECKING THE MEMORY STATUS

1.Using the Enter key, access the Menu Function.

2.From the drop-down menu select the View Information with the Enter key.

3.From the Configuration menu, scroll down to the System Menu and select using the Enter key.

4.Using the Down arrow key, scroll down to Total Memory.

5.Pressing the Enter key will confirm the total memory installed.

Installing additional memory > 121