SCAN TO USB MEMORY

NOTE:

This option is only available if USB Memory is plugged into the USB port on the front of the machine.

1.Select Scan and from the drop down menu select the USB Memory option.

2.Enter a file name using the Ten Key pad.

Up to 64 characters (Single byte character) can be entered.

If Scan to Memory is executed without a file name being entered, the default file name added in Scanner Menu > Scan to USB Memory > Default File Name in Menu Mode is used.

If no file name is entered and you have not specified your own Default File Name, the file name used by the machine default is "Image."

If the name of the file to be written in USB Memory is the same as files already existing in the memory, three options appear on the screen.

You are asked whether you wish to Save File?

OK

The file will replace the one that already exists (limited to one file).

Rename

Enables you to rename the file.

Cancel

This cancels file writing.

When scanning multiple documents from the ADF, or on the Flatbed from Job Build Scanning with File Format set to Jpeg, the image file is divided by page and saved. The file name is "file name entered-###," with ### being a number between 000 and 999 automatically allocated to each page.

3.Set Density and Media size.

Operation > 68