
3
4
Loading the ink ribbon cartridge
Insert the ink ribbon cartridge all the way.
Remove the protective material from the cartridge slot and insert the ink ribbon cartridge.
The RIBBON indicator blinks and an error will be generated if you do not press from the center of the ink ribbon cartridge to slide it all the way until you hear a clicking sound.
See page 30. “If an indicator is lit or blinking”
Attach the side cover.
See page 14. “Connecting the power supply and turning on/off the printer”
If the side cover cannot be attached properly, remove the ink ribbon cartridge and then reinsert it.
ENGLISH
Introduction Preparation
Removing the ink ribbon cartridge
Lift up the tab to release the ink ribbon cartridge, and remove the cartridge.
Printing
For Your Reference
17