ENGLISH
Preparation Introduction
Printing
For Your Reference
Troubleshooting
If paper is jammed
1
2 After removing the paper tray, make sure no print paper is bent or curled and that paper is properly placed in the tray.
3 With the paper tray removed, turn the printer on again to automatically eject the paper from the printer.
If paper is automatically ejected, go to Step 8.
If paper is not automatically ejected, turn the printer off and go to Step 4.
4 Look through the paper tray door opening to see if there is any jammed paper visible at the back.
If jammed paper is visible, go to Step 5.
If jammed paper is not visible, contact your nearest Olympus service center for repairs.
5 Set the printer on its rear so that the
front of the printer is facing up. Insert your finger in the paper dispenser slot located on the bottom and slide the jammed paper towards the paper tray door.
If you cannot move the paper with your finger, use tweezers or the like.
32
