6 The waterproof function is not effective when the O-ring is not installed

 

correctly. When installing the O-ring, take care that it does not project from

 

the groove and that it is not twisted. Also, when sealing the Case, close

 

the lid after confirming that the O-ring has not come out of the groove.

 

7 This product is an airtight construction made of plastic

 

(polycarbonate). When it is left for a long time in a car, on a boat, at the

 

beach, or at other places reaching a high temperature, or when it is

 

subjected for a long time to uneven external force, it may be deformed

 

and the waterproof function may be lost. Pay sufficient attention to

 

temperature control. Also do not place heavy objects onto the product

EN

during storage or transport, and avoid unreasonable storage.

 

8 When the O-ring contact surface is pressed strongly from the outside

 

of the Case, or when the Case is twisted, the waterproof function may

 

be lost. Take care not to exert excessive force.

 

9 Please use the Case only after performing the advance test and the final

 

check.

 

0 If you should notice drops of water or other signs of water leakage

 

while taking pictures, immediately stop the dive, remove any water

 

from the camera and the product, test according to the item “Final

 

check”, and confirm whether leakage has occurred or not.

 

Handling the Product

zUse or storage of the product at the following locations may cause defective operation, defects, trouble, damage, fire, internal clouding, or water leakage. This should be avoided.

Locations reaching high temperatures such as those under direct sunlight, in an automobile, etc.

Locations with open fireWater depths in excess of 40 mLocations subject to vibrations

Locations with high temperature and humidity or with severe temperature changes

Locations with volatile substances

zThis product is made of polycarbonate resin with excellent impact resistance, but it may be damaged by scraping against rocks etc. It also may break when it hits hard objects or is dropped.

zThis product is not a case to soften impacts to the camera inside the product. When this product with a digital camera inside it is subjected to impacts or heavy objects are placed onto it, the digital camera may become damaged. Please handle it with sufficient care.

EN 6