8. Appendix

Q & A on the use of the PT-036

Q1:

What digital camera models can be used with this product?

 

A1:

This product (PT-036) is designed exclusively for use with the

 

 

µ 760/Stylus 760 digital camera.

 

 

 

 

Q2:

What cautions must be observed when loading the digital

EN

 

camera into the Case?

 

A2: Pay special attention to the following items when loading the camera into the Case.

1Make sure that the digital camera has enough battery power left. Battery power is used up very quickly underwater due to frequent flash use.

2Check the remaining number of pictures on the image storage. Please use a card with a sufficient remaining number in order to reduce the number of times the Case has to be opened and closed.

3Remove the strap from the digital camera. When the camera is loaded without removing the strap, the strap may get caught when the Case is sealed and this will cause water leakage.

4Turn off the camera.

5Before sealing the Case, confirm that the O-ring has been installed properly in the groove on the rear lid of the Case.

6Confirm that the O-ring and the O-ring contact surface on the front lid are free of dirt, hairs and other foreign matter.

7Insert the silica gel for defogging. Please use silica gel for the Olympus Case.

Q3: What cautions must be observed when using and storing the Case?A3: Pay special attention to the following items.

1When the O-ring contact surface is pressed strongly from the outside of the Case, or when the Case is twisted, the waterproof function may be impaired and water leakage may occur.

EN 33