Olympus PT-036 Seal the Case, Check the operation of the loaded camera, CAUTION:, After sealing the Case, check that the camera functions normally

Seal the Case.

Close the rear lid gently (so that the O-ring does not slip out of the groove), hook the buckle on the edge of the rear lid, and tilt the buckle lock/unlock lever in the direction of the arrow to seal the Case hermetically.

EN

CAUTION:

•Seal the Case by turning both buckle lock levers down in arrow direction. When one of the buckles is left open, the Case will not be sealed and water leakage will occur.

•Close the rear lid of the Case so that the LCD hood and the lens cap strap don’t catch. If they catch, water leaks may result.

Check the operation of the loaded camera.After sealing the Case, check that the camera functions normally.1Push the POWER button on the Case and confirm that the camera turns ON/OFF.

2Turn the mode dial on the Case and confirm that the camera mode switches properly.

•Check if the correct mode is being switched from the LCD monitor.

3Press the shutter lever on the Case and confirm that the camera shutter releases.

•Also operate other control buttons on the Case and confirm that the camera functions properly.

EN 19