Olympus PT-036 Make sure the camera is loaded properly, CAUTION:, Insertion of silica gel, •Is the mode dial set to “SCN”, •Is the digital camera loaded properly

Insertion of silica gel

Before sealing the Case, insert the silica gel bag provided for prevention of fogging between the bottom of the camera and the Case.

EN Pay attention to the orientation

CAUTION:

•Insert the silica gel all the way at the specified location and with the specified orientation. When the orientation is not correct, the silica gel bag will be caught when the Case is sealed and water leakage will occur.

•If the Case is sealed without inserting the silica gel fully, the silica gel bag will be caught by the O-ring and water leakage will occur.

•Once silica gel has been used, the moisture absorption performance will be impaired. Always replace the silica gel when the Case is opened and closed.

Make sure the camera is loaded properly.Check the following points before sealing the Case.•Is the digital camera loaded properly?•Is the mode dial set to “SCN”?•Is silica gel inserted all the way at the specified location?•Is the O-ring attached properly to the opening on the Case?

•Is there any dirt or foreign matter on the O-ring or the O-ring contact surface on the front lid?

•Is the waterproof function maintenance performed?

EN 18