Olympus PT-036 For Prevention of Water Leakage Accidents, Setting the underwater shooting scene mode, Hair, Fibers, Examples of foreign matter sticking to the O-ring

Setting the underwater shooting scene mode

zThe µ 760/Stylus 760 cameras incorporate several shooting scene modes for underwater shooting, including wide-angle and macro modes. Simply select the mode that’s most appropriate for the scene you are shooting.

For details, see “5. Underwater Shooting According to the Scene Type” (P.24) of this manual.

zFor details on mode setting, refer to the digital camera’s operation manual.

EN

For Prevention of Water Leakage Accidents

When water leakage occurs while this product is being used, repair of the camera housed in this product may become impossible. Please observe the following cautions for use.

1When sealing this product, make sure that no hairs, fibers, sand particles or other foreign matter stick not only to the O-ring, but also to the contact surface (front cover). Even a single hair or a single grain of sand may cause water leakage. Please check with special care.

Examples of foreign matter sticking to the O-ring

Hair Fibers Grains of sand

2The O-ring is a consumable part. Please replace it at least once a year with a new one. Before each use, perform the proper maintenance.

3Deterioration of the O-ring will acelerate according to the use conditions and the storage conditions. Immediately replace the O-ring with a new one if it is damaged, cracked, or has lost its elasticity.

4During O-ring maintenance, clean the inside of the O-ring groove and confirm the absence of dirt, dust, sand, and other foreign matter.

5Apply the specified silicone O-ring grease to the O-ring.

EN 5