3Press the PLAY ( `) button.
• The “Hour” indicator flashes.
4Press the + or – button to set the “Hour”.
5Press the PLAY ( `) or 9button to accept the “Minute”.
•The “Minute” indicator flashes.
•Pressing the 0button enables the “Hour” setting again.
6Press the + or – button to set the “Minute”.
•Repeat steps 5 and 6 to continue to set the “Year”, “Month” and “Date” in the same way.
7After setting the “Date”, press the PLAY ( `) or 9button.
•This completes the time and date setup procedure.
Notes:
•You can switch the time indication between the
•You can change the order of the date indication by pressing the DISP/MENU button while you are setting the year, month, or day.
Example: July 14, 2010
Recording (Fig. 6)
1Press the FOLDER/INDEX button to select the desired folder.
2Press the REC ( s) button to start recording.
•The record/play indicator light turns red, and recording starts.
3Press the STOP (4) button to stop recording.
•New recordings are saved as the last file in the folder.
1 Current microphone sensitivity
2 Current folder
3 Current recording mode
4 Current file number
5 Recording level meter
6 Recording time
7 Remaining recording time
To Pause Recording (Fig. 7)
To Pause:
While the recorder is during recording mode, press the REC (s) button.
•[PAUSE] appears on the display and the record/play indicator light flashes.
To Resume Recording:
Press the REC (s) button again.
•Recording will resume at the point of interruption.
Notes for Recording
•If [FULL] appears on the display, you cannot record in theselected folder. In such a case, erase unnecessary files.
•If the recorder is placed directly on a table when recording a meeting, it tends to pick up table vibrations. Put a notebook or other item between the table and the recorder so that the vibration is not easily transmitted for clearer recording.
•Even if you press the DISP/MENU button, the display will not change to current recording time if the remaining recording time is 5 minutes or less.
•When remaining recording time is less than 60 seconds, the record/ play indicator light starts fl ashing in red. When the recording time is decreased to 30 or 10 seconds, the light flashes faster.
•The recorder will enter Stop mode if it has been left paused for 60 minutes or longer.
•In case of diffi cult acoustic conditions or low speaker’s voice, recording in [HQ] is recommended. Also, usage of an external microphone (sold separately) could improve the quality of recordings.
Recording from external
Microphone or other Devices
The external microphone and other devices can be connected and the sound can be recorded.
•When using an external microphone, select adequate microphone, such as a
•To connect the recorder to an external device, use the connecting cord KA333 (optional), and the stereo/monaural converting plug adapter supplied with KA333.
•The input level cannot be adjusted on this recorder. When you connect the recorder to an external device,
execute a test recording and adjust the output level of the external device.
1 A audio input terminal of other devices (Fig. 8)
2 Converting plug adapter of KA333 (Fig. 8)
LCD Display Information
You can select an option for the display of the recorder. This will help review and confirm different recorder settings and file information.
Operation | Display |
While the recorder | The total number of |
is during stop | files recorded in the |
mode, press and | folder and remaining |
hold the STOP (4) | recording time appears |
button | on the display |
While the | The display switches |
recorder is during | between current |
recording mode, | recording time and |
press the DISP/ | remaining recording |
MENU button | time |
While the recorder | Playing time ➔ |
is during stop | Remaining playing time |
mode or playback | ➔ Recording date of the |
mode, press the | file ➔ Recording time |
DISP/MENU | of the file ➔ Playing |
button | time … |
Note:
•In LP mode, if the remaining time is over 1000 hours, the time will be displayed as 999h 59m 59s.
Playback (Fig. 9)
1Press the FOLDER/INDEX button to select the desired folder.
2Press the 9 or 0 button to select the file to playback.
3Press the PLAY ( `) button to start playback.
•The record/play indicator light turns green, and the elapsed playing time is indicated on the display.
4Press the + or – button to select the proper sound volume.
•The display shows the volume level. You can choose between [00] to [30].
1 Current folder
2 Current file number
3 Playing time
EN 7
