1Select the file you want to transfer, and press the PLAY ( `) button to play it.
2 While the recorder is during play- |
back mode, press and hold the |
DISP/MENU button for 1 second |
or longer. |
3Press the PLAY ( `) button.
• I f y o u l e ave t h e r e co r d e r untouched for 8 seconds or longer before you press the PLAY ( `) button in Step 3, Clear mode will be canceled, and the recorder will enter Stop mode.
•Do not disassemble, repair or modify the unit yourself.
•Do not operate the unit while operating a vehicle (such as a bicycle, motorcycle, or
•Keep the unit out of the reach of children.
3Press the 9 or 0 button to select a destination folder.
4Press the PLAY (`) button.
•The destination folder and the number of the moved file appear on the display, and moving is completed.
•If the destination folder is full (100 files), [FULL] appears on the display, and you cannot move the file to that folder.
1 Destination folder
2 Destination number of the file (Fig. f)
Index Marks (Fig. g)
Index marks can be placed in a file during recording or playback to provide a quick and easy way of keeping track of important sections in the file.
1 While the recorder is during re- cording (pause recording) mode or playback mode, press and hold the FOLDER/INDEX button to set an index mark.
•An index number appears on the display.
Clearing an Index Mark:
While the index number appears on the display, press the ERASE (s) button.
•Up to 10 index marks can be set in a file.
•Sequential index marks numbers are reassigned automatically.
Resetting the Recorder [CLEAR]
(Fig. h)
This function resets the current time and other settings to their initial status. It is useful if you are having problems with the recorder, or if you want to erase the entire memory of the recorder.
1Press and hold the STOP (4) button and the ERASE ( s) button for 3 seconds or longer.
2 Press the 9 or 0 button to select [YES].
10EN
General Precautions
Read this manual carefully to ensure that you know how to operate it safely and correctly. Keep this manual in an easily accessible location for future reference.
•The warning symbols indicate important safety related information. To protect yourself and others from personal injury or damage to property, it is essential that you always read the warnings and information provided.
Warning regarding data loss:
•Recorded content in memory may be destroyed or erased by operating mistakes, unit malfunction, or during repair work.
•For important recorded content, we recommend you to write it down some where.
•Any liability for passive damages or damage of any kind occurred due to data loss incurred by a defect of the product, repair performed by the third party other than Olympus or an Olympus authorized service station, or any other reasons is excluded from Olympus’s liability.
For safe and correct Usage
•Be sure to stop the recorder before replacing the battery.
•Do not leave the recorder in hot, humid locations such as inside a closed automobile under direct sunlight or on the beach in the summer.
•Do not store the recorder in places exposed to excessive moisture or dust.
•Do not use organic solvents such as alcohol and lacquer thinner to clean the unit.
•Do not place the recorder on top of or near electric appliances such as TVs or refrigerators.
•Avoid sand or dirt. These can cause irreparable damage.
•Avoid strong vibrations or shocks.
Batteries
VWarning:
•Batteries should never be exposed to flame, heated,
•Do not at tempt to recharge alkaline, lithium or any other non- rechargeable batteries.
•Never use any battery with a torn or cracked outer cover.
•Keep batteries out of the reach of children.
•If you notice anything unusual when using this product such as abnormal noise, heat, smoke, or a burning odor:
1removethebatteriesimmediately while being careful not to burn yourself, and;
2call your dealer or local Olympus representative for servicing.
Troubleshooting
Q1: Nothing happens when a button is pressed.
A1: The HOLD switch may be set to [HOLD] position.
The batteries may be depleted. The batteries may be inserted incorrectly.
Q2: No sound or quiet sound is heard from the speaker while playing back.
A2: The earphone plug may be plugged into the recorder.
The volume may be set to the minimum level.
Q3: Recording is not possible.
A3: By pressing the STOP (4) button repeatedly while the recorder stops, check if the display shows:
•The remaining recording time in the selected folder may have reached [00:00].
•The number of files is 100. Checkifthedisplayshows[FULL]by pressing the REC (s) button.
Q4: The playback speed is too fast (slow).
A4: The recorder may be set to fast (slow) Playback.
