Olympus VN-5500, VN-7500 Erase, Canceling Playback Fig. p, Basic Operation of the Menu Mode

Canceling Playback (Fig. p)

To Stop:

Press the STOP (4) button.

•The recorder stops in the middle of the file being played.

To Resume Playback:

Press the PLAY ( `) button again.

•Playback will resume at the point of interruption.

Forwarding and Rewinding (Fig. q)

Fast Forward:

While the recorder is during playback mode, press and hold the 9button.

•When you release the 9 button, the recorder will resume normal playback.

Rewind:

While the recorder is during playback mode, press and hold the 0button.

•When you release the 0 button, the recorder will resume normal playback.

Notes:

•The end of the file is located by pressing and holding the 9 button during fast forwarding. The recorder will pause at the end of the file. If you do not release the 9 button, the recorder will continue to fast forward.

•The beginning of the file is located by pressing and holding the 0 button during rewinding. The recorder will pause at the beginning of the file. If you do not release the 0 button, the recorder will continue to rewinding.

•When the index mark is shown in the middle of a fi le, it will stop temporarily in the position of the index mark.

Locating the Beginning of the File

While the recorder is during playback mode (playback or playback in slow/fast mode), press the 9or 0button forwards or rewinds to the beginning of the next file or the file being played respectively.

•If an index mark is encountered midway, playback begins at that point (See “ Index Marks” for details).

Changing Playback Speed (Fig. w)

While the recorder is during playback mode, press the PLAY ( `) button.

Normal speed	Slow playback	Fast playback
	(- 25 )	( 50 )

•When the slow playback mode is selected, the [J] appears and, for the fast playback mode, [K] appears on the display while the recorder is playback.

•The recorder stops playback when you press the STOP (4) button while playback in the slow/fast mode, or when it reaches to the end of the file. If you once press the STOP (4) button and start playback again, the recorder will playback files in normal speed as well.

Listening with Earphone (Fig. e)

You can listen to files by connecting earphones to the earphone jack. If an earphone is connected, the speaker doesn’t emit sound. Sound will be played back monaurally.

•To avoid irritation to the ear, insert the earphone after you turn down the volume level.

•When you listen with the earphone during playback, do not raise the volume too much. It may cause hearing impairment and loss in hearing ability.

•Earphones are not supplied. You can use any standard 3.5mm monaural earphone or headphone.

Erase

You can easily erase unnecessary files. Sequential file numbers are reassigned automatically.

Erasing One File at a Time (Fig. r)

1Press the FOLDER/INDEX button to select folder.

2.Press the 9 or 0 button to select the file to be erased.

3Press the ERASE (s) button.

4Press the 9 or 0 button to

select [YES].

1 File to be erased

5Press the PLAY ( `) button.

Erase All Files from a Folder (Fig. t)

1Press the FOLDER/INDEX button to select the folder to be erased.

2Press the ERASE (s) button twice.

3 Press the 9 or 0 button to

select [YES].

1 Folder to be erased

4 Press the PLAY ( `) button.

Notes:

• An erased file cannot be restored.

• If operation is not executed for 8 seconds during the setting, it will return to the stop status.

• Completion of erasing may take several seconds. Do not attempt to remove, replace battery or attempt any other functions on the voice recorder during this period because data may be corrupted.

Menu

Basic Operation of the Menu Mode

(Fig. y)

Using the menu function, you can change various settings according to your preference.

1Whiletherecorderisduringstopmode, press and hold the DISP/MENU but- ton for 1 second or longer.

2Press the +or –button to select what you would like to set up.

• The selected menu item flashes.

3Press the 9 or 0 button to change the setting.

4Press the PLAY ( `) button to con- firm the setting.

5Press the STOP (4) button to close

the menu. (Fig. u)

1 Menu setting screen

2 Move the selection one position up/increase the number

3 Move the selection one position to the left

4 Confirm the setting

5 Move the selection one position down/decrease the number

6 Move the selection one position to the right

Notes:

•The recorder will stop if you leave it idle for 3 minutes during a menu setup operation, when a selected item is not applied.

8EN