Olympus OM-2, zm2000qdk manual TTL Centralized Control, Flash operation Normal automatic

THE T32(T20)/OM-2 WAY—FLASH PHOTOGRAPHY

COULDN'T BE SIMPLER AND MORE ACCURATE

T32 (T20) and OM-2	Ordinary electronic flash
(TTL Centralized Control	unitandcamera
flash operation)	(Normal automatic
	flash operation)

Picture angle

= Light measuring angle

All required of the T32 (T20) is a flick of the on/ off switch. The rest is taken care by the OM-2. The dial settings required of conventional "auto" flash units — ASA film speed setting, aperture setting, flash mode switching, exposure compensation — are not needed with the T32 (T20).

Unlike conventional auto flash units which re- gulate flash emission by an independent light sen- sor, the T32 (T20) utilizes the OM-2's own built-

in SBC light sensors, so that flash acceptance angle

always coincides with the picture angle of the camera lens.

The OM-2 shutter automatically closes at the

instant the flash exposure has been completed.

Picture angle

Light measuring angle

eliminating camera shake. Correct exposure can be confirmed without taking your eye off the viewfinder.

By the incorporation of an incorrect flash pre- vention system, the electronic flash will not fire if the shutter speed is faster than the synchroniz- ing range.

Special techniques such as diffused lighting are made easy, obviating complicated compensa- tions and guesswork.

Usable flash-to-subject distance range is greatly expanded - from 18cm (F22) to 26m (F1.2) with a guide number of 32 (ASA 100, meters). (From 0.6 ft. to 86 ft. with a guide number of 104 at ASA 100.).

32